Hydro, Wind, Solar & T&D
Safety Services
Crane and rigging training, safety staffing, and ASME B30 equipment inspections for the generation and transmission sector — delivered by a team that has qualified utility line crews, trained powerhouse maintenance teams at federal hydropower plants, and inspected lifting gear for offshore wind operations. We serve the work you actually have: outages, erections, upgrades, and the inspections that keep them moving.
Built for Generation Work. Proven in the Field.
Power work is scheduled work: a refurbishment window at a hydro plant, a maintenance outage on the turbine deck, a wind erection season, a substation energization date. Our trainers and inspectors mobilize to those windows — we have delivered train-the-trainer rigging programs for electric utility line crews (including in Alaska), crane and rigging training inside USACE hydropower powerhouses under EM 385-1-1, rigging courses for power plant operations teams, and recurring lifting-gear inspections supporting offshore wind operations.
That is the bench you get: a CCO-certified crane inspector (owner Patrick Salazar, MCI · TCI), OSHA 500 construction outreach trainers, and safety professionals staffed to the credential your contract actually specifies — not a generic resume with the sector name pasted in.
Three Divisions Supporting Generation & Transmission
Training that sticks because it is taught by field people; staffing matched to your contract’s spec; inspections written against the standards your owner’s engineer will actually check.
Crane & Rigging Training
NCCCO exam preparation and practical support, qualified rigger and signal person programs, and train-the-trainer models that leave your senior people able to qualify their own crews — built for line crews, powerhouse teams, and erection contractors.
- Rigger & signal person qualification
- NCCCO operator exam prep & practicals
- Train-the-trainer programs (co-branded certs available)
- Digger derrick & utility equipment training
- Mobile crane & telehandler operator training
Safety Staffing
SSHOs for federal-spec work, site safety managers for plant construction and outages, and safety oversight staffed to the credential your contract names — EM 385 experience where USACE specs demand it.
- Site Safety & Health Officers (SSHO)
- Outage & turnaround safety managers
- Wind erection & solar EPC safety leads
- CHST / CSP professionals per contract spec
- Short-term coverage scoped to your window
Equipment Inspections
ASME B30 and OSHA inspections, with a CCO-certified crane inspector on staff (owner Patrick Salazar, MCI · TCI): mobile and crawler cranes on erection sites, powerhouse overhead cranes under 1910.179, and the slings, shackles, and below-the-hook devices your lifts hang from.
- Annual & post-assembly crane inspections (1926.1412)
- Powerhouse overhead crane inspections (1910.179)
- Rigging gear & below-the-hook inspections (B30.9 / B30.20)
- Lifting-gear recertification programs for wind operations
- Critical lift plan review against OSHA & ASME
Every Type of Power Generation
Different generation sources, different standards, different lift problems. Here is where we fit in each.
Hydroelectric & Dams
Crane and rigging training inside working powerhouses — including USACE plants under EM 385-1-1 — turbine and generator overhaul rigging (stator and rotor work), and inspections of powerhouse bridge and gantry cranes.
Wind — Onshore & Offshore
Rigger and signal qualification for erection crews, crane inspections during tower assembly, and recurring lifting-gear and below-the-hook recertification programs — including gear supporting offshore wind operations.
Transmission & Substations
Line crew rigging training and train-the-trainer programs, digger derrick operator training, and lift oversight for transformer deliveries and substation construction.
Plant Maintenance & Outages
Pre-outage rigging refreshers for operations and maintenance teams, crane and rigging-gear inspection sweeps before the window opens, and outage safety staffing on exact mobilization dates.
Utility-Scale Solar
Safety staffing for EPC contractors, telehandler and mobile crane operator training for tracker and inverter installation, and lift oversight across large, fast-moving sites.
BESS Battery Storage
Lift planning support and crane oversight for containerized battery placement, operator training for the handling equipment, and site orientations that include lithium-ion thermal hazard awareness.
Qualified for Regulated Environments
Utility owners and federal specs ask for specific paper. This is the paper our people carry.
Programs & Site Access
- EM 385-1-1 project experience (USACE hydropower)
- OSHA 500 construction outreach trainers; general-industry outreach by an authorized OSHA 501 outreach trainer
- OSHA 30 Construction & General Industry
- CHST / CSP professionals per contract requirement
- NFPA 70E arc flash training available
- TWIC and port access experience
- Background-check-ready personnel
Technical & Lift Compliance
- CCO-certified crane inspector (MCI · TCI): owner Patrick Salazar
- NCCCO exam preparation & practical exam support
- Qualified rigger & signal person evaluation
- ASME B30.3 / B30.5 / B30.9 / B30.20 inspections
- OSHA 1910.179 overhead crane inspections
- Critical lift plan review against OSHA & ASME
- Lithium-ion thermal hazard awareness (BESS)
Built for Generation Construction
Outage windows, federal specs, and heavy lifts reward vendors who have done the work before. We have.
Sector-Real Bench
Our trainers have qualified electric utility line crews, powerhouse maintenance teams, and plant operations staff — in the field, on their equipment, not in a hotel conference room.
Outage-Ready
Maintenance outages and erection seasons run on exact dates. We mobilize training, inspections, and safety staff to your window — and we plan backward from it, not forward from ours.
Critical-Lift Support
Transformer sets, stator pulls, nacelle picks: we review lift plans against OSHA 1926 Subpart CC and ASME B30 and put a CCO-certified crane inspector on the gear before it flies. When a lift calls for engineered design, we coordinate with your engineer of record — and we will tell you when it does.
Documentation That Holds Up
EM 385 activity hazard analyses, inspection reports written against the standard’s own line items, and training records with wallet cards delivered when the class ends — paper your owner’s rep, insurer, and auditor will actually accept.
Power & Energy Safety FAQ
Quick answers for utility owners, EPC contractors, and plant maintenance managers.
Yes — we have delivered crane and rigging training inside working USACE hydropower powerhouses, which means working under EM 385-1-1, coordinating with plant operations, and fitting training around generation schedules. We also support the activity hazard analyses and documentation those projects require.
Rigger and signal person qualification for erection crews, crane inspections during assembly, and — the piece most owners under-plan — recurring inspection and recertification programs for slings, shackles, and below-the-hook devices, including lifting gear supporting offshore wind operations.
Yes. We deliver rigging and digger derrick training directly to line crews, and train-the-trainer programs — with co-branded certificates available — that leave your senior linemen able to qualify their own people going forward. We travel to your territory, including Alaska.
Yes — and the best results come from planning before the window opens: rigging refresher training for the maintenance team ahead of the outage, an inspection sweep of cranes and rigging gear before day one, and safety staffing mobilized to your exact dates.
We staff safety professionals for utility-scale solar EPCs, train operators on the telehandlers and cranes doing tracker, inverter, and container placement, and build lithium-ion thermal hazard awareness into site orientations for BESS installations.
We review lift plans against OSHA 1926 Subpart CC and the ASME B30 series, inspect the crane and rigging before the pick, and support lift execution. Where a lift requires engineered design — and some do — we coordinate with your engineer of record, who keeps engineering design and stamping; either way we flag the need early rather than paper over it.
Hub for Sector-Specific Safety
3psafety.net is the central hub. Each industry page covers credentials, project types, and scope detail for that sector.
Serving All 50 U.S. States
3P Safety deploys credentialed safety professionals, NCCCO crane operators, and ASME B30 inspectors to every U.S. state — from corporate headquarters in Goldsboro, NC and four regional offices nationwide. No matter where your project is, we’re cleared, credentialed, and ready to mobilize within 48–72 hours.